akzonobel logo

Kromasil CelluCoat

analysis

You are working with HPLC for the separation and identification of analytical substances in laboratories. Challenge the selectivity of Kromasil for your most sensitive analysis.

development

You need to quickly purify substances for further studies in the development of pharmaceuticals. Kromasil will help you achieve your goals with ease and efficiency.

production

You are using preparative chromatography for high efficiency purification in a pilot or up to industrial-scale production. The robustness of Kromasil is available in ton quantities to meet your process demands.

Faster chromatography

How to achieve baseline separation in less than 30 s

Thanks to Kromasil CelluCoat product characteristics like the absence of pressure limits, you can run analytical chromatography at very high flow rates and save time. The high selectivity and 3 µm particles are also important factors in speeding up the method. You achieve an improved resolution, which, in turn, allows a higher flow rate.

Move the cursor over the step titles to display the resulting chromatogram

 
arrowdown
  1. Start with standard conditions
  2. Decrease particle size and column length
  3. Decrease column length
  4. Increase flow rate
  5. Increase flow rate even more

Conditions: Particle size: 5 µm · Column length: 250 mm · Flow rate: 1 ml/min

Common conditions: Column diameter: 4.6 mm · Solute: trans-Stilbene oxide · Eluent: Heptane/2-Propanol (90/10) · Temperature: 25 °C · Detection: UV 229 nm

· Eka Chemicals, Separation Products · SE–445 80 Bohus, Sweden · Phone +46 31 58 70 00 · Fax +46 31 58 77 27 ·
· E-mail kromasil@akzonobel.com ·