Kromasil CelluCoat

CelluCoat

analysis

You are working with HPLC for the separation and identification of analytical substances in laboratories. Challenge the selectivity of Kromasil for your most sensitive analysis.

development

You need to quickly purify substances for further studies in the development of pharmaceuticals. Kromasil will help you achieve your goals with ease and efficiency.

You are using preparative chromatography for high efficiency purification in a pilot or up to industrial-scale production. The robustness of Kromasil is available in ton quantities to meet your process demands.

Stretched pressure limits

Kromasil CelluCoat withstands flow rates equivalent to pressures up to 400 bar – which is about the limit for most HPLC systems

High speed chromatography

The specially designed coating method that is used for Kromasil CelluCoat is also a factor that enhances the mechanical stability of the packing material. Kromasil CelluCoat withstands flow rates equivalent to pressures drop up to 400 bar over the bed. This is otherwise a well-known restriction factor for coated polysaccharide phases. This makes it possible to run analytical chromatography a lot faster within the boundaries of most commercial HPLC systems.

Fig. 2 - Stability under high speed chromatography.
Conditions:
Solute: trans-Stilbene oxide
Stationary phase: Kromasil CelluCoat, 3 µm
Column size: 4.6×50 mm
Mobile phase: Heptane/2-Propanol (90/10)
Flow rate: 7 ml/min
Temperature: 25 °C
Detection: UV 229 nm

· Eka Chemicals, Separation Products · SE–445 80 Bohus, Sweden · Phone +46 31 58 70 00 · Fax +46 31 58 77 27 ·
· E-mail kromasil@eka.com ·